9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-1852003.png)
8. Remove the springs from the levers.
9. Remove the rear locating sleeves for the cables and remove the cables from the levers.
10. Pull the cables out of the holders on the rear axle.
11. Remove the right cable from the mounting under the rear heat shield.
12. Remove the cables from the holders behind the cable adjustment.
13. Cut off the cable tie securing the cable under the heat shield.
14. Pull out the cables.
To fit
