9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Parking Brake Lever: Service and Repair
Handbrake lever
To remove
1. Raise the car.
2. Remove the return springs from the levers on the right and left sides.
3. Press out the rear locating sleeve from the holders on the right and left sides.
4. Press out the front locating sleeve from the holder on the right side.
5. Remove the cable from the levers.
6. Remove the nuts from the heat shield plate in front of the tank.
7. Remove the adjusting nut from the pull rod and move aside the cable adjuster. Measure the thread length on the pull rod.
8. Remove the rubber gaiter.
9. Lower the car and remove the driver's seat and the center console