9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-912002.png)
9. Remove the thermostat housing and thermostat.
To fit
1. Check and clean the sealing surfaces. Lubricate the rubber seal with a little nonacidic vaseline, part no. 30 06 665, or the equivalent.
2. When fitting the thermostat, make sure that the bleed hole faces up ("TOP" marked on thermostat).
3. Fit the thermostat housing.
Tightening torque: 22 Nm (16.2 ft. lbs.)
4. Fit the mounting for the coolant pipe.
