9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-759001.png)
Valve: Service and Repair
Removal Of The Valve Gear
This method presupposes that the cylinder head has been removed.
IMPORTANT: The cylindrical surfaces surrounding the valve springs are sliding surfaces for the tappets. These surfaces must not be scored.
Therefore, protect the tappet guides with protective collars 83 93 746.
1. Remove the camshaft bearing caps. It is important to finish with the bearing cap on the tappets that are under load. Lift out the camshafts.
2. Remove the tappets and keep them in the Valve stand 83 93 787.
3. Fit protective collars 83 93 746
4. Use Valve spring compressor 83 93 761 and Valve spring depressor 83 93 779 to remove the valve cones.
5. Lift out the valve discs and valve springs. Lift out the washer with guide seals with the 83 94 157 pliers for removing valve guide seats
6. Remove the valves. Keep them in Valve stand 83 93 787.
