9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-2073011.png)
1. Plug in the connector.
2. Fit the stepping motor and tighten both retaining bolts.
3. Refit the floor air duct.
4. Refit the side panel on the centre console.
5. Put the glove box back in place.
6. Calibrate the ACC-system by simultaneously pressing the buttons "AUTO" and "OFF".
IMPORTANT: All previous diagnostic trouble codes are erased when calibrating. Obtain readouts of stored diagnostic trouble codes before
calibrating.
