saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Evaporator Core|Description and Operation|Page 6924 > < Discharge Air Temperature Sensor / Switch, HVAC|Specifications|Page 6920
Page 1
background image

Evaporator Core: Description and Operation

Evaporator 
The evaporator is located in the climate control unit. It consists of a heater box (cabin air/refrigerant), where the refrigerant flows through a pipe system
with cooling flanges.

The incoming refrigerant expands and boils (evaporates) in the evaporator, absorbing heat from the pipes with cooling flanges. In turn, the cooling
flanges are heated by the incoming/recirculating cabin air. When the heat is absorbed, condensation is formed on the outside of the evaporator. This
condensation is drained out into the engine compartment through a hose. Under certain climate conditions, relatively large puddles of water can collect
under a parked car.

The evaporator is available in different design depending on if the car is a LHD or RHD.
The spare evaporator for after-market purposes is provided with split pipes to facilitate mounting.

Evaporator Core|Description and Operation|Page 6924 > < Discharge Air Temperature Sensor / Switch, HVAC|Specifications|Page 6920