9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Hose/Line HVAC: Service and Repair
Evaporator Low-Pressure Pipe
Evaporator Low-pressure Pipe
Removing
IMPORTANT: The evaporator low-pressure pipe must be cut when removing. The spare part consists of a two-sectioned pipe.
1. Position the car on a lift.
2. Remove the grille.
3. Drain the refrigerant from the A/C system.
4. Remove the battery.
5. Remove the bolt in the console that secures the battery cable holder.
6. Remove the main fuse box.
7. Remove the compressor low-pressure pipe from the holder on the front cross member.