saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Intake Air Temperature Sensor > < Fuel Tank Pressure Sensor|Specifications|Page 3885
Page 3
background image

NOTE:  Pay careful attention to the line from the tank to the EVAP canister.

9. Tighten the tank straps with the left-hand one securing the handbrake wire.

10. Connect the line from the tank to the EVAP canister.
11. Screw on the fuel filter.
12. Fit the protective cover on the fuel filter.
13. Remove the plug from the tank connection and fit a new hose to the filler pipe.

IMPORTANT  The hose to the filler pipe must always be replaced with a new one. Never refit an old one as there is risk of it cracking.

14. Fit the filler pipe purge line.
15. Lower the car.

Intake Air Temperature Sensor > < Fuel Tank Pressure Sensor|Specifications|Page 3885