9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
7. Run the oxygen cables forward and plug in the connector. Secure the cables with a cable tie.
IMPORTANT The oxygen sensor's leads must not be twisted.
Make sure that the lead does not rest against hot surfaces or sharp edges.
8. Fit the exhaust manifold's heat shield.
9. Fit the bypass pipe with valve. Lubricate the 0-ring at the connection to the turbo inlet pipe with non-acidic Vaseline, part no.30 06 665, or the
equivalent.
10. Fit the top engine cover