9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
11. Grip the piston rod and remove the nut with socket 89 96 662. The nut is of self-locking type and must not be reused.
12. Remove the bearing and upper spring seat.
13. Remove the spring, rubber gaiter and compression stop.
14. Remove the damper using Spanner 89 96 670.
15. Lift the damper out of the MacPherson strut.
To fit
1. Inspect the gaiter and bushes for damage.
2. Tighten the damper using Spanner 89 96 670.
Tightening torque: 215 Nm (159 ft. lbs.)