9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
Control Arm Bushing: Service and Repair
Suspension Arm
Bush In Suspension Arm
To remove
1. Raise the car and remove the front wheel on the side from which the suspension arm is to be removed.
2. Remove the anti-roll bar nuts.
3. Undo the ball joint nut.
Press out the ball joint using 89 96 696 Puller.
Remove the nut from the ball joint.
4. Remove the screw that attaches the stanchion to the suspension arm.
5. Right side: Remove the cover plate.
All: Remove the screw that attaches the suspension arm to the subframe.
Remove the suspension arm.
6. Remove the seal from the bush.