9-3 SE Convertible (9400) L4-2.0L Turbo (B205) HO (2001)
/l4-2.0l_turbo_(b205)_ho/Page-1546001.png)
Seals and Gaskets: Service and Repair
Drive Shaft Seal
Drive shaft seal
To remove
1. Right side:
Remove the intermediate shaft, see Drive shafts ->, Adjustment/replacement, intermediate shaft.
Left side:
Tilt out the drive shaft, see Drive shafts, Adjustment/replacement, Drive shaft ->.
2. Remove the seal using a large, bent screwdriver.
To fit
1. Lubricate the new seal and fit it using special tool 83 90 122.
