9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
Body Emblem: Service and Repair
Emblem, Front Wings
Emblem, Front Wings
Removing
Protect the paintwork with tape around the emblem. Use a steel spatula and prise carefully under the emblem.
Fitting
-
S/SE emblem
First wash the area where the emblem is to be mounted with benzene.
NOTE: The emblems and the car must be at room temperature (approximately 20 degrees C) before the emblems can be mounted.
Position the emblem on the front wing by measuring as indicated in the illustration and mount the S- or SE-emblem. The emblem should be
centred above the side direction indicator.
-
Viggen emblem