9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
-
Put switch to CANCEL position and hold it there while starting the engine.
CRUISE lamp should go on to acknowledge diagnosis mode.
Is the function correct?
NO
-
See: Manual Gearbox/Checking the Bulb
YES -
See: Manual Gearbox/Check CANCEL Function
Checking the Bulb
Checking the Bulb
-
Switch off the engine.
-
Turn the ignition switch to the ON position.
-
Connect BOB (Break Out Box) between CRUISE control module and CRUISE control module female connector.