9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
/l4-2.0l_turbo_(b205)_ho/Page-3060133.png)
-
The test lamp should light.
Checking the Wiring Harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness.
Observe the multimeter, test lamp or diagnostic tool while doing this.
Is the function correct?
NO
-
See: Automatic Transmission/Rectifying the Lead - XII
YES -
See: Automatic Transmission/Checking the Fuse - I
Check RESUME Function
Check RESUME Function
-
Put switch to RES/ position.
CRUISE lamp should go on.
Is the function correct?
NO
-
See: Automatic Transmission/Checking the Control Module's Switch Input - III
YES -
Continue With Check RESUME Function
-
Release RES/.
CRUISE lamp should go out
Is the function correct?
