9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
Brake Switch (Cruise Control): Testing and Inspection
Checking the Brake Lights Switch
Information
Information
Fault diagnosis is performed partly with the control module in diagnosis mode. To exit diagnosis mode increase the speed to above 32 km/h (20 mph) or
turn off the ignition. All the tests in diagnosis mode must be carried out in a determined order. If they are carried out incorrectly, the diagnosis will return
to 'Check SET function' and have to be restarted from there.
-
is the car equipped with a manual gearbox or automatic transmission?
See: Manual Gearbox
See: Automatic Transmission
Initiating Diagnostics
Initiating Diagnostics
-
Switch off the engine.
-
Apply the handbrake.
-
Keep clutch pedal depressed.