9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
Is the function correct?
NO
-
See: Automatic Transmission/Checking Control Module's Switch Input - II
YES -
Continue with the Check SET Function
-
Release SET button.
CRUISE lamp should go out.
Is the function correct?
NO
-
See: Automatic Transmission/Checking Control Module's Switch Input - II
YES -
See: Automatic Transmission/Check RESUME Function
Checking Control Module's Switch Input - II
Checking Control Module's Switch Input
-
Switch off the engine.
-
Turn the ignition switch to the ON position.
-
Connect BOB (Break Out Box) between CRUISE control module and CRUISE control module female connector.