9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
/l4-2.0l_turbo_(b205)_ho/Page-729003.png)
7. Remove the protective sleeves and fit the valve tappets.
8. Fit the camshafts and bearing caps, starting where the cams point downwards and press on the tappets. Bearing caps marked 1-5 for the inlet side,
6-10 for the exhaust side.
Tightening torque 15 Nm (11 ft. lbs.).
IMPORTANT: The black bolts have an oilway and should be fitted on the spark plug side.
9. Line up the marks on the camshafts with their timing marks.
