9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
/l4-2.0l_turbo_(b205)_ho/Page-761002.png)
6. Fit the new seal with the fitting tool, part no. 83 94 876.
7. Fit the crankshaft pulley.
Tightening torque: 175 Nm (129.5 ft. lbs.)
8. Fit the drive belt. Check the position of the belt on all the belt pulleys and fit the cover.
9. Fit the wheel.
Tightening torque: 120 Nm (89 ft. lbs.)
10. Lower the car to the floor.
11. Relieve the belt tensioner with a ratchet handle extension and remove the drill.
12. Start the engine and run it at idling speed for a while. Switch off the engine and check that the belt is positioned correctly.
