9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
11
Cars with automatic transmission:
a
Remove the nut that secures the gearshift selector to the gearbox.
b
Remove both bolts that secure the gearshift selector console to the gearbox housing.
12
Fit the front part of the evaporator low-pressure pipe.
13
Lubricate the new O-rings with synthetic vaseline and fit them in both ends of the low-pressure pipe front section.
14
Connect the pipe at both ends
15
Tighten the pipe at both ends.
Tightening torque: 34 Nm (25.1 lbf ft)
16
Fit the evaporator low-pressure pipe in the brackets on the bulkhead and wheel housing.
17
Fit the low-pressure side service connection and press on the clip.
18
Cars with automatic transmission:
a
Tighten the nut that secures the gearshift selector to the gearbox.
b
Tighten both bolts that secure the gearshift selector console to the gearbox housing.