9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
NO
-
Continue with Quick Check
YES -
See: No Communication With the ABS/Check That the ABS Control Module Is Awake
Rectify the fault.
After performing this procedure See: No Communication With the ABS/Final Check
Check That the ABS Control Module Is Awake
Check That The ABS Control Module Is Awake
-
Turn the ignition switch to the ON position.
-
The ABS lamp should come on for 3 seconds and then go out.
Is the function correct?
NO
-
See: No Communication With the ABS/Checking the ABS Power Supply and Grounding
YES -
See: No Communication With the ABS/Checking the Diagnostic Tool
Checking the ABS Power Supply and Grounding
Checking the ABS power supply and grounding
Unplug the connector.
-
Control module, ABS (547)
-
Turn the ignition switch to the ON position.