9-3 SE Hatchback (9400) L4-2.0L Turbo (B205) HO (2000)
/l4-2.0l_turbo_(b205)_ho/Page-477003.png)
1. Plug the connector into the side impact sensor.
WARNING:
-
Always use pop rivets designed for plastic, part number 44 81 834.
-
Make sure the connector is face down.
2. Fit the side impact sensor with pop rivets in its original position in the door.
3. Fit the moisture barrier.
IMPORTANT: Check that the water barrier seals against the inner door panel and make sure that it is not damaged.
4. Fit the door trim. See To fit Door trim, front door or To fit Door trim, CV.
