saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Keyless Entry Receiver|Locations|Page 10392 > < Keyless Entry Receiver|Locations|Page 10390
Page 1
background image

Keyless Entry Receiver: Description and Operation

The remote control receiver has an integrated loop antenna and is available in three types (EU, US/CA, JP with an extra external antenna) for
frequencies: 433.92 MHz and 315 MHz. It is located between the front seats in the rear pan of the centre console and is supplied with +30 voltage from
fuse 25 and is further connected to TWICE on the following pins:

Ground

Pin 13

Signal

Pin 14

Function

The integrated receiver antenna receives the coded signal from the remote control. The signal is processed and is sent on to TWICE which is set to
identify the programmed remote controls for the car. If the received signal is correct, the command is executed.

Keyless Entry Receiver|Locations|Page 10392 > < Keyless Entry Receiver|Locations|Page 10390