9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
Seat Back: Service and Repair
Backrest, 40, 60-Percent
To remove
1
Release the backrest from the seat-belt member and fold it forwards.
2
Undo the bracket on the long load opening.
3
Pull the backrest away from the mounting by the long load opening and pull out the joint pin at the wheel housing.
4
Detach the upholstery tensioner and lift out the backrest.
To fit
Fit in reverse order
Backrest, 60-Percent
To remove
1
Remove the 40 per cent part,
2
Release the backrest from the seat-belt member.
3
Fold forward the backrest.
4
Remove the centre seat-belt mounting to access the right-hand backrest mounting.
5
Remove the right-hand backrest mounting.
6
Pull out the free end of the backrest and remove the joint pin from its mounting by the wheel housing.
7
Detach the upholstery tensioner and lift out the backrest.
To fit
Fit in reverse order
NOTE: When fitting the centre seat-belt mounting, the upper and lower parts must be located in each other and a locating stud in the floor.