9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
3. Fit the dust cap on the brake piston.
4. Press the dust cap's collar into the brake cylinder's outer groove,
5. Press the piston into the brake cylinder by such an amount that the dust cap fastens in the brake piston's groove
6. Fit the brake pads.
IMPORTANT: The RH and LH outer brake pads are not the same. The pads should be fitted with the metal warning strip facing down.
7. Fit the hydraulic body.
Rear Brakes
To dismantle
1. Remove the brake caliper.
2. Remove the brake pads.
3. Clean the hydraulic body.
4. Remove the dust caps.