9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
4
Fit the control panel and fit the control shaft.
IMPORTANT
Make sure that the control shaft is correctly inserted into the heating unit before fitting it to the control panel.
5
Refit the side panels on the centre console.
6
Refit the glove box.
Switches, Control Panel Removing
Removing
1
Remove the control panel.
2
Remove the control knobs from the control panel.
IMPORTANT
Use visegrip pliers if the knobs are difficult to remove. Place a rag between the pliers and the knobs to prevent scratching of the control knobs.
3
Unhook the clips on the front of the control panel.
4
Remove the switches, control panel.
Fitting
1
Fit the switches, control panel.
2
Fit the front section of the control panel.
3
Fit the control knobs.
4
Refit the control panel.
Control Wire