9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
Hose/Line HVAC: Service and Repair
Compressor Low-Pressure and High-Pressure Pipes
Removing
1
Drain refrigerant from the A/C system, see Refrigerant, A/C/Service and Repair.
IMPORTANT
Both the receiver and the compressor oil absorb moisture from the air that cannot be removed. All connections that are opened must be plugged
immediately.
2
Remove the grille and the left headlamp.
3
Cars with turbo:
a
Remove the hose between the charge air cooler and the throttle body.
b
Remove the hose between the charge air cooler and the turbo charger.
4
Remove the low-pressure and high-pressure pipes from the clip on the front cross member.
5
Remove the bolt in the PAD-connection by the receiver dryer. Plug the opening.
6
Remove the compressor high-pressure pipe and plug the openings.