9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
Receiver Dryer: Service and Repair
Removing
1
Drain refrigerant from the A/C system, see Refrigerant, A/C/Service and Repair.
2
Remove the grille.
3
Remove the bolts holding the pipes for the receiver.
4
Remove the bolt securing the receiver to the holder on the condenser.
5
Lift up the receiver.
6
Plug the openings.
Fitting
1
Fill compressor oil in the pipe leading to the receiver, see Air Conditioning Compressor/Compressor Oil/Service and Repair.
2
Fit the receiver in the holder.
3
Fit new O-rings on the pipes for the receiver. Lubricate the O-rings with synthetic vaseline.
4
Fit the pipes and tighten the bolts.
Tightening torque 9 Nm (6.6 lbf ft).
5
Tighten the bolt securing the receiver on the condenser.
6
Vacuum pump the A/C system and fill refrigerant, see Refrigerant, A/C/Service and Repair.
7
Refit the grille.