saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fault Criteria|Page 4855 > < Fault Criteria|Page 4853
Page 3
background image

converter (oxygen sensor 2).

Once the conditions for the diagnosis have been fulfilled, the voltage changes from oxygen sensor 2 will be analysed. The catalytic converter is defective
if the voltage changes are too great with regard to engine load and speed.

Voltage changes from oxygen sensor 2 are corrected with respect to load and engine speed and totalled for 50 individual, approved periods for oxygen
sensor 1 *) Fault criteria are fulfilled if the total exceeds a calibrated value.

*) An approved period means that the sensor voltage pulse ratio is 30-80 % (+).

Conditions for diagnosis

-

Diagnosis not yet performed during this trip

Catalytic converter heating:

-

Vehicle speed >0 km/h

-

Open throttle

-

Engine speed (rpm) x load (kPa) =>60000

-

Total acceleration >15 sec.

-

Above conditions fulfilled for 120 sec.

-

No period at idling speed >40 sec.

-

No fuel shut-off >10 sec.

Evaluation of catalytic converter

-

Vehicle speed 30-100 km/h.

-

Open throttle

-

Closed loop activated

-

Engine speed (rpm) x load (kPa) = 60000 - 260000

-

Engine coolant temperature >60C (>140F)

-

Oxygen sensor 2>0.4 V on some occasion during this driving cycle

1

Measure:

Fault Criteria|Page 4855 > < Fault Criteria|Page 4853