9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
Solenoid Valve, EVAP Shut-Off: Service and Repair
Dismantling
1
Raise the car.
2
Detach the shut-off valve hose from the EVAP canister.
3
Lower the car slightly.
4
Clean (using compressed air is necessary) and remove the white cover over the shut-off valve.
5
Unplug the connector and lift the valve upwards.
6
Detach the hose connection from the valve.
7
Remove the valve.
To fit
1
Connect the valve to the hose. Make sure that the opening for the cable is correctly positioned.
2
Spray with kontakt 61 and plug in the connector.
3
Carefully lower the valve into the vent pipe.