saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Injectors - Trionic T5|Page 5078 > < Injectors - Trionic T5|Page 5076
Page 10
background image

4

Change any defective injectors.

WARNING
Provide adequate ventilation!

To fit

1

Fit the fuel rail and injectors. Make sure the correct connector is plugged to the relevant injector.

Checking fuel pressure

See Fuel System for checking the fuel pressure/fuel pressure regulator.

Injectors

WARNING
Removal of the fuel rail involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection
with this work:

-

Work only in a well-ventilated area! If approved equipment for the extraction of fuel vapour is available then make sure it is used.

-

Wear suitable gloves! Prolonged contact with fuel can cause skin irritation.

-

Keep a class BE fire extinguisher close by! Be mindful of the danger of sparks caused by short circuits and when connecting and
disconnecting leads in electrical circuits.

-

Smoking is strictly forbidden.

To remove

Injectors - Trionic T5|Page 5078 > < Injectors - Trionic T5|Page 5076