9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
1
Apply acid-free vaseline, part no. 30 05 665, to the rubber seal on the mass air flow sensor. Change the rubber seal if necessary.
2
Fit the mass air flow sensor, 2 screws.
IMPORTANT
The mass airflow sensor must be fitted in the intake air pipe with the arrows in the direction of flow.
3
Fit the hose to the mass air flow sensor.
4
Fit the top of the air collection box, snap fasteners and screws.
5
Attach the connecting hose to the turbo inlet pipe.
6
Plug in the mass air flow sensor connector after first spraying it with Kontakt 61, part no. 30 21 763.
7
Fasten the mass air flow sensor cable to the cable clips on the top of the air collection box. Adjust the cable so that it cannot be pinched or chafed.