9-3 SE Sedan (9400) L4-2.0L Turbo (B204) HO (1999)
Circuit Diagram
The function is blocked in the following situations:
^
The fluid temperature exceeds 20 °C.
^
The vehicle speed exceeds 7 km/h.
^
The position of the selector lever changes.
The coil resistance in the solenoid is approx. 4 ohms.
The current strength at idling speed with the handbrake applied and the selector lever in position D is approx. 900 mA and the fluid pressure 3.4 - 4.6
bar.
Electrical faults (short-circuit to ground or B+ and open circuits) in the solenoid valve or wiring harness will put the transmission in limp-home mode.