9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-2546001.png)
Shock Sensor: Service and Repair
Glass breakage sensor
To remove
NOTE: The glass breakage sensor is not stocked separately as a spare part. The complete lens cover must be replaced.
1. Release the lens cover on the center roof light.
2. Loosen the switch panel on the roof lamp by pressing it forwards and at the same time pulling the rear edge downwards.
3. Release the electrical connector from the sensor and lift off the lens cover.
To fit
