9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
1. Fit the combined handle-lighting assembly by pushing the moulding against the right clip until it snaps into place and then fasten the left clip.
2. Fasten the bolts for the license plate lighting ramp.
3. Fit the left rear light. Fit the 3 nuts for the lamp housing and plug in the connector in the lamp holder.
4. Fit the nuts (2 pcs) that secure the hand le from the inside, beside the lock unit.
5. Fit the pull handle to the inside of the tailgate.
6. Fit the tailgate trim.