9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-2804006.png)
5. Operate the hood cover so that the latches engage on both sides.
6. Adjust the soft top cover so that the alignment with the body is correct. Tighten the lock's nuts.
Tightening torque: 24 Nm
7. Raise the soft top cover and remove the special tools.
8. Manoeuvre the soft top cover up and down a few times in order to check its function.
9. Fit the Rear side trim, CV.
IMPORTANT: Check the lock pin in the drive mechanism. If the pin is broken, the soft top cover will behave almost normally since the
friction in the joint can be sufficient to operate the cover. In such cases, the soft top cover will "crack" when closing.
D Soft top cover lock cables
