9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
1. Fit the latch motor and tighten the bolts. Respective collision cable end sleeves pointing at each other. Fit new cable ties.
Tightening torque, two upper bolts: 14 Nm (10.3 lbf ft)
Two lower bolts: 7 Nm (5.2 lbf ft)
2. Fit the operating arms to the motor.
3. Plug in the connector.
4. Run the soft top up and down a few times and check the function.
5. Refit the shell.