9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
Wheel Speed Sensor: Service and Repair
Wheel Sensor/Front Right
Wheel Sensor/Front Right
To remove
1. Remove the top part of the air cleaner and, if necessary, the mass air flow sensor, and move it aside.
2. Remove the connector's cable tie.
3. Separate the connector and snip the cable tie.
4. Snip the cable tie by the air cleaner attachment point.
5. Raise the car and remove the wheel.
6. Clean the area round the wheel sensor using a soft wire brush.