9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-885017.png)
26. Fit the heat shield over the exhaust manifold.
27. Fit the charge air pipe.
28. Fit the bypass pipe with valve. Use a new O-ring for the connection to the turbocharger intake pipe.
29. Fit the top engine cover.
30. Fit the battery and connect its vent hose.
31. Fill up with coolant. For the correct mixture, refer to Coolant, Specifications.
Close the filler cap.
32. Bleed the system as follows:
Note: A/C and ACC must be OFF.
Fill the cooling system to MAX level. Close the cap on the expansion tank, start the engine and warm it up at various engine speeds until the
radiator fan starts. Carefully open the cap and top up to MAX.
33. Raise the car to check for oil or coolant leakage.
34. Lower the car and top up with coolant / transmission fluid (aut) as necessary
35. Set the clock and radio code where applicable.