9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
1. Attach the throttle cable to the cable mounting.
Fit the clip and twist it into place.
2. Hook the throttle cable onto the link arm and insert the cable through the bulkhead partition.
3. Connect the throttle cable to the accelerator.
4. Remove the cable adjustment clip. Adjust the cable's play by holding the throttle cam in the closed position with one hand while pulling the cable
taut with the other. Then slacken the cable to the sleeve's nearest notch. Fit the clip.
5. Fit the protection.