9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-2314009.png)
4. Measure the precise position for the attachments. The eye on the outer attachment (centre of round rod) must be flush with the crossmember as
illustrated.The eyes must be 280 ± 1 mm C-C.
5. Seam weld the attachment eyes as illustrated, welding length is 10 - 15 mm. Do not forget to plug weld in the middle of the outer attachment.
6. Apply primer to all bare surfaces. Use Standox 1K Fullprimer. After painting, apply a thin layer of anti-corrosion agent and allow it to enter
behind the attachments.
