9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-579003.png)
-
From switch ALL WINDOWS DOWN pin 15 to the STC control module pin 7
-
From switch ALL WINDOWS UP pin 17 to the STC control module pin 35
-
From switch FL WINDOW DOWN pin 18 to the STC control module pin 36
-
From switch FL WINDOW UP pin 19 to the STC control module pin 21
-
From switch FR WINDOW DOWN pin 6 to the STC control module pin 22
-
From switch FR WINDOW UP pin 7 to the STC control module pin 8
-
From switch RL WINDOW DOWN pin 13 to the STC control module pin 9
-
From switch L WINDOW UP pin 15 to the STC control module pin 7
-
From switch RR WINDOW DOWN pin 1 to the STC control module pin 10
-
From switch RR WINDOW UP pin 2 to the STC control module pin 23
The switch panel and all the switches is voltage fed with B+ from the control module pin 40. When a switch is pressed in, the corresponding control
module input is fed with B+ and information on the current button position is used by the STC control module to activate the corresponding window lift
motor via a relay.
When the soft top is being raised, the control module lowers the windows approx. 15 centimetres to prevent the soft top from jamming on any of the
windows.
It is only possible to operate the window lifts DOWN with any of the five switches while the soft top is being raised.
