9-3 Viggen Convertible (9400) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-1587001.png)
Shift Solenoid: Service and Repair
Solenoid
To Remove
Important: Solenoid ST, which controls system pressure, must not be removed!
1. Remove the valve housing cover, see -> .
2. Unplug the relevant solenoid's connector.
3. Remove the solenoid's retaining bolt.
4. Pry the solenoid loose, using a screwdriver.
To Fit
1. Position the solenoid and tighten the bolt.
Tightening torque: 7 Nm (5 ft. lbs.).
2. Plug in the solenoid's connector.
3. Fit the valve housing cover, see ->.
