9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
1
Remove the front seat from the car.
2
Unplug the connector for the height adjustment motor.
3
Unscrew the motor, 2 screws and cable tie.
4
Lift the motor off the gear wheel.
To fit
Fit in reverse order.
Motor and Sensor, Backrest Adjustment
To remove
1
Take the front seat out of the car.
2
Undo the straps holding the backrest upholstery at the bottom.
3
Release the upholstery strips on the underside
4
Undo the 2 screws holding the plastic plate and pull the plate out of the backrest upholstery.
5
Undo the rear of the backrest upholstery by releasing the upholstery strips along the sides and folding back.