9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
/l4-2.3l_turbo_(b235)_ho/Page-922003.png)
7
Make sure that there are no impurities or other foreign matter in the oil sump and clean its sealing surface.
8
Apply an even bead of Locative 518 on the oil sump's sealing surface and fit the oil sump in place.
Tightening torque 22 Nm (16 ft. lbs.).
9
Fit the protective plate, plug in the oil level sensor connector and press the cable back into its clamps.
10
Check that the oil plug is properly tightened and connect the cables to the oil pressure sensor, generator and starter motor. Tightening torque 25
Nm (19 ft. lbs.).
