9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
/l4-2.3l_turbo_(b235)_ho/Page-1058006.png)
1. Clean the contact surfaces and fit a new gasket on the exhaust manifold.
2. Lift the exhaust manifold into place.
3. Fit the washers, spacers and nuts.
Tightening torque: 25 Nm (18.4 ft. lbs.)
4. Fit the upper, long through bolt. The bolt head should face the air collector casing.
Fit the power steering pump in place.
5. Fit the lower bolt and the 2 upper bolts. Then fit the lower through bolt. Tighten the two through bolts.
Tightening torque: 24 Nm (17.7 ft. lbs.)
