9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
/l4-2.3l_turbo_(b235)_ho/Page-2710010.png)
30
Fit the clips and screw the screws into place. Do not over-tighten the screws as this may distort the drum. If binding is noted, back off the screws
by 1'2 turn.
31
Fit the air ducts.
32
Use a cable tie to fasten the cable harness around the air ducts.
33
Refit the supports on the driver's and passenger sides. Begin by lifting the screw and nut in the upper mounting and then the two screws in the
lower mountings.
34
Cars without ACC:
If the cable for the temperature valve has become slow, it should be replaced with a cable marked with yellow. If the cable is already marked with
yellow, it does not need to be replaced. See WIS Body, Manual Climate Control, MCC Control Cable.
35
Fit the air distribution shaft and check that the dampers work.
