9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
16.
Turn the temperature knob to maximum cold.
17.
Push the air-blending flap lever as far forward as it will go.
18.
Secure on the attaching plate to the heating and ventilation unit and fit the clip securing the cable sheath to the heating and ventilation unit.
19.
Turn the heater knob alternately to both end positions to make sure the air-blending flap closes properly in both positions.
20.
Refit the side panel on the center console.
21.
Position the glove box and plug in the glove box light connector.
22.
Guide the glove box into the snap fastener on the bulkhead bracket and fit the retaining screws and the retaining bolt as well as the expanding rivet
at the front edge.
23.
Close the screw covers and close the glove box.
Warranty/Time Information
Failed Object:
85485
Fault/Reason code:
71
Location code:
09