9-3 Viggen Coupe (9400) L4-2.3L Turbo (B235) HO (1999)
11
Plug the openings.
12
Remove the evaporator low-pressure pipe from the bulkhead bracket.
13
Remove the high-pressure pipe from the PAD-connection by the lead-through in the bulkhead.
14
Plug the openings.
15
Remove the bolt securing the PAD-connection.
16
Plug the openings.
17
Raise the car. Cut the low-pressure pipe through the wheel housing as shown in the illustration.
18
Lower the car and lift up the pipe sections.
Fitting