saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Idle Speed/Throttle Actuator - Electronic > < Tank Pressure Sensor - Trionic T5|Page 4363
Page 3
background image

NOTE:  Pay careful attention to the line from the tank to the EVAP canister.

9

Tighten the tank straps. The left-hand strap holds the handbrake wire.

10

Connect the line from the tank to the EVAP canister.

11

Screw on the fuel filter.

12

Fit the protective cover on the fuel filter.

13

Remove the plug from the tank connection and fit a new hose on the filler pipe.

IMPORTANT
The hose to the filler pipe must always be changed. The old hose must not be refitted as there is a risk of it splitting/cracking.

Tightening torques
hose clamps 2.0 Nm (1.4 lbf ft)

14

Fit the filler pipe purge line.

15

Lower the car.

Idle Speed/Throttle Actuator - Electronic > < Tank Pressure Sensor - Trionic T5|Page 4363